12.5 C
New York
Wednesday, May 27, 2020
Home How to How to install Kodi on a Raspberry Pi in 2019

How to install Kodi on a Raspberry Pi in 2019


Kodi and a Raspberry Pi make for one of the easiest and best media centers you can make yourself.

Kodi is a great way to make your TV smart. It’s the continuation of XBMC, a free and open-source application that is a great media player and a complete replacement for just about any other media-centric software. It’s not a streaming server or DVR. It’s the software you use to watch video content and listen to music through any screen with an HDMI connection.

Because it’s open-source, Kodi runs on just about every platform known to man — Windows, Android, iOS, macOS and a gazillion different flavors of BSD and Linux.

Several of those operating system platforms also work really well on the Raspberry Pi. A marriage of the two makes for a cheap media center that’s easy to set up and has all the features you’ll find on expensive alternatives. It’s a DIY project that anyone can do and the results are incredible.

Raspberry Pi 4

The Raspberry Pi brings a lot of changes to the platform in terms of hardware and capability. This means software that uses things like hardware decoders to play video content needs to be updated. That’s in progress for the Raspberry Pi 4, but it’s not yet in a stage anyone would call complete.

If you want to run Kodi on your Raspberry Pi 4, your best bet right now is to install LibreELEC. LibreELEC is a lightweight operating system designed to run Kodi It’s 100% open source and free, and there’s a version designed for the Raspberry Pi.

Once you’ve got LibrELEC installed you’ll need a micro HDMI to HDMI cable or adapter and then you’re all set.

It’s worth noting that right now things aren’t 100% perfect for Kodi on the Raspberry Pi 4. You might experience video tearing and synchronization issues, especially with 4K content. The folks behind LibrELEC are working hard to get things just right though, so make sure you keep your system updated.

New and Powerful

CanaKit Raspberry Pi 4 2GB Basic Kit


$72 at Amazon

The Starter Kit

The new Raspberry Pi 4 is a significant improvement over the 3 B+, and this kit from CanaKit has what you need to get up and running right away.

Getting started (for the Raspberry Pi 3 or 3 B+)


You’ll need to buy a few things:

  • Raspberry Pi 3
  • A case of some sort
  • A power supply
  • A microSD card with an adapter to plug it into your computer

You can run Kodi on an earlier model of Raspberry Pi (and plenty of folks do) but the better hardware in the third revision makes a big difference. The power supply needs to provide 5 volts at 2 amps through a Micro-USB port. Any microSD card will work, but faster cards are better — try to get something Class 10 or higher. You’ll also want one at least 8GB in size.

The case needs to have decent airflow because things can get hot. It should also stay together if the cat or a roaming infant get behind things and pulls on cords. And you’ll need a cable that can take HDMI with audio from the Raspberry Pi to the screen you want to see your stuff on.

The easy way is to buy a kit that has all this stuff in it. You’ll save a couple of dollars and a lot of time. I went with this kit from CanaKit and it has everything you need to get started and it’s decent quality stuff.


You’ll also want to have a keyboard and mouse you can use directly with your Kodi box. Almost any keyboard and mouse will work, but after trying a whole bunch of them through the years on various small electronic projects I have to recommend the Logitech K400. It’s bigger than many others, but it works on everything without any setup or hassle — even the PlayStation 4 which can be finicky and hates peripherals.

I have like three of them around the office and they’ve held up just fine.

It Just Works

CanaKit Raspberry Pi 3 Complete Starter Kit


$75 at Amazon

Older but reliable

This kit uses the older Raspberry Pi 3 model so everything works as intended.

Mini Desktop

Logitech K400 Plus Wireless Touch TV Keyboard


$25 at Amazon

At your Fingertips

You want a keyboard and a mouse so why not get everything in one easy package?

Putting things together


Gather up your handful of parts and find a nice flat spot to put them together on. I’m going to recommend you find a static-free place to work because everyone recommends it. I have a big static mat that covers half my desk that I leave there and use as a mouse pad. If you don’t have a static mat, just be really careful.

Also, round up any tools you might need to put your case together. You might need a screwdriver or a small socket driver. The packaging it comes in or any instructions will tell you. The one I bought for this just snaps together and I’ll never go back to one that needs to be screwed or bolted together again. Follow the directions and get your Raspberry Pi placed in the case and then make sure all the various ports and holes aren’t obstructed and that your wires and SD card will fit easily.

Find a spot to put it when you’re finished where the cords aren’t bent at an extreme angle and nobody will trip over it. If you’re going to use a remote (either a USB receiver type or a more DIY LIRC IR style) make sure the signal will be able to hit the receiver. Once installed, you’ll not need to touch any of the hardware for a long time, so take a minute or two and find the right place for it.

Install the software


I recommend you use OSMC (Open Source Media Center) as the operating system unless you know what you’re doing when it comes to Linux. OSMC is Linux (Debian stable) but the front end and all admin is done through the simple OSMC skin for Kodi. And it’s simple to install. You download an installer for Windows, Mac or Linux, plug your SD card into your computer and follow a couple of simple steps to configure your network. Tell it where your SD card is and press a button.

To get started, point your web browser to OSMC.tv’s download page and pick the right version for your computer. Download it, run it and follow the super-simple instructions. Take some time to read a bit more about the project and see if you want to donate to this 100% volunteer project. Building an open-source media center is fun for a lot of people, but servers on the internet cost money. Lots of it.


Once you have everything on your SD card, plug it into your Raspberry Pi. Put it where it’s going to live, plug in the keyboard and HDMI cable (and Ethernet cable if you want a more robust wired network) then plug in the power. If everything worked (and it should have) you can turn on your TV and keyboard and go through the setup.

It’s simple — you need to let the software know what language to use, what time zone you’re in and what your new Kodi box should be named. Then you’re finished. Kodi is set up and running on your Raspberry Pi and you can do the same things with it that you can if it were running on a PC or Android TV or anything else.

Next steps


There are some things you’ll want to do to get started watching video content and listening to music through your new Kodi box. You might need to buy licenses for MPEG-2 and VC1 hardware decoding. They’re cheap and easy to buy over the internet. I think you should spend the few bucks to buy them instead of finding other ways to acquire them.

You might also want to set up Plex and the PleXMBC add-on to decode and stream video to your new Kodi box. Kodi is a player that can attach to your storage or countless streaming servers via the internet. If you have a large media library of your own, Plex is an easy-to-set up media server that works great with Kodi to watch and listen to everything you have.

You can also install support for your own DVR backend or an HDHomeRun tuner or set things up to watch recorded PlayOn streams. Look at the Add-ons settings for all the legal and Kodi project approved ways to get content from the internet to your screen. Of course, there are plenty of places on the internet to get more information about services you can add to Kodi, but we’ll let you find those on your own.

OSMC is a skinned version of Kodi that’s easy to install. That means you can use any Android Kodi remote app to control things. I like Kore but there are plenty to try, Just search Kodi remote in the Play store.

The next step is to lean back and enjoy it.

Questions? Problems?

We’re here to help! If you have problems getting Kodi to work on a Raspberry Pi, leave a comment down below and we’ll try to answer it!

Updated October 2019. It’s still too early to install Kodi on the Raspberry Pi 4, but the good news is that it works great on the Raspberry Pi 3 B+.


Apple Releases macOS Catalina 10.15.5 With Battery Health Management Features, Fix for Finder Freezing

Apple today released macOS Catalina 10.15.5, the fifth update to the ‌macOS Catalina‌ operating system that was released in October

First App Using Apple and Google’s Exposure Notification API Launches in Switzerland

The first app that takes advantage of the Exposure Notification API developed by Apple and Google has launched in Switzerland,

Fitbit Charge 4 review

Fitbit has been producing fitness trackers for over a decade, with its products consistently considered as some of the best in its space.In March, Fitbit announced its latest premium fitness tracker, the Fitbit Charge 4, the first Fitbit tracker to feature a built-in GPS.I have been using the Fitbit Charge 4 for about a week now, and am now able to share my impressions of the deviceSetting Up The Charge 4 Fitbit Charge 4 Unboxing and Setup 1 of 10 Front of Box Back of Box What's Inside Extra Band for larger wrists Clip-on charger Fitbit app setup page 1 Setup Page 2 Setup Page 3 Setup Page 4 Feature List In the box was the Charge 4, an extra band that meant for larger wrists, and the charger, which clips to the device.The Charge 4 came mostly charged, so I could setup almost immediately, and I had already set up the Fitbit app prior to receiving the watch.You will have to create an account to use the Fitbit app but it may take around ten minutes. This includes account creation through pairing and a firmware update.DisplayThe Fitbit Charge 4 has a grayscale display, much to the dismay of many a reviewer. However, I heavily disagree that this is a bad thing. I do not want my fitness tracker to be a beautiful distraction. I want it to track my fitness. That being said, the display is easy to see in any lighting and the brightness automatically adjusts to the environment.The watch also has many watch faces that you can switch between, with the one pictured above being called Rightful Stats.Sleep TrackingThe Fitbit Charge 4 features sleep tracking, with a pretty extensive breakdown in addition to a Sleep Score. The sleep tracking page gets a slight layout change for Fitbit Premium users, as you will see below.The Fitbit Charge 4 also features an SPO2 sensor that works during sleep. The SPO2 sensor is meant to measure blood oxygen variation, which can help identify breathing issues during sleep Fitness TrackingThe Fitbit Charge 4’s main selling points as far as fitness are its integrated GPS and the new measurement system known as Active Zone Minutes. Although my walks don’t exactly create the most beautiful map, here is one of my walks including the breakdown of heart zones and pace. It is important to note that the GPS isn’t in use unless you initiate an exercise from the watch prior to starting it. Exercise Tracking 1 of 6 BatteryThe Fitbit Charge 4 touts a pretty solid mixed-use battery life, lasting around four days. This is where the embedded GPS hurts. With it on, the battery life drains dramatically.The GPS is only activated when an exercise is in progress and Fitbit says this only lasts around five hours. Though, with a half-hour walk every day, the battery lasted almost four full days. However, the Charge 4 recharges in around four hours, so if it dies, you aren’t without it for too long.General UsabilityThe Fitbit app is unremarkable and looks fairly similar to any other fitness app, mostly reminding me of the UI of Samsung Health, as shown side by side below. Each of the items that appear on the Fitbit app homepage are able to be moved around to better suit your particular needsThe watch is not completely waterproof, though it is “swimproof”, to use Fitbit’s term, and is water resistant to 50M.The watch face is customizable, with the one shown in the display section being called Rightful Stats. For the watch itself, there are about 10 alternative bands available on the Fitbit website at the time of me writing this article, and they will run you anywhere between $30 and $50.AvailabilityYou can purchase the Fitbit Charge 4 for $150 at the Fitbit website in Black, Rosewood, and Storm Blue/Black or at Best Buy in Black and Rosewood.

Samsung Galaxy S20 Ultra vs Huawei P40 Pro: Which is the king of zoom?

We put both phones' cameras through their paces to crown a winner